5 Common Samsung Dryer Problems and How to Fix

Samsung is renowned for producing high-quality goods. It is among the best businesses around the globe. Every product has the potential to develop defects due to regular disintegration and casual errors. The Samsung Dryer is built to last and is simple to operate, even though it may occasionally experience technical difficulties. First, identify the most common Samsung Dryer problems and then resolve them.

The Five most common Samsung Dryer Problems, along with their Respective Solutions:

Here are some everyday things that can go wrong with your Dryer, as well as ways to fix them:

The Dryer won’t Turn ONCheck child lock Check for an adequate power supply Check for a damaged switch
Samsung Dryer not HeatingCheck heating element Check electric stability Check lint filter blockage
The Dryer won’t SpinCheck kid lock Check drive belt Check drive motor
Samsung Dryers Make a NoiseCheck drum rollers Check for an overload of clothe Scheck Idler pulley
The Dryer finishes the cycle early or takes too long to dry clothing.Check the Dryer settings. Check moisture sensor Check the blower wheel.

Remember to turn off the Dryer before attempting any troubleshooting.

Read More About Samsung:

Samsung dryer problems and troubleshooting

The Dryer won’t Turn ON

The Samsung Dryer has been operating normally for quite some time and will not suddenly begin using. After resetting all of its settings, restart the Dryer after a brief delay. If it’s not functioning, you must fix the problem.

Issues and how to troubleshoot

  • It is necessary to completely shut the door before starting the Dryer. After you have checked it out, you can close the entrance to the Dryer entirely again.
  • If the Dryer’s button breaks, the appliance will not begin operating. If the switch is broken or unstable, the electricity supply is impossible. If it is unfixable, you should get a new one instead of trying to fix it.
  • The Dryer will only turn on with adequate electricity or voltage. Steer clear of using an extension cord and directly connect the Dryer to the power circuit instead.

Samsung Dryer not Heating

One of the most common Samsung Dryer problems is that it spins in a circle but does not heat the space inside. Regular use and pressure will eventually cause the heating element of the Samsung Dryer to burn out. Your clothing will not dry if the heating element in the Dryer is not functioning correctly. If the Dryer is not performing as it should, it must fix the problem immediately; otherwise, it will worsen.

Troubleshoot a Samsung dryer

  • The Dryer won’t heat if the heating element breaks. If the heating element needs repairing, do so; otherwise, replace it.
  • Due to power supply fluctuations, the Dryer will need more power to dry the garments completely. Conduct a power supply stability test.
  • If the Dryer’s particulate filter is clogged, it will not heat up. Before replacing the lint filter, remove it, wash it with cleanser and water, and allow it to dry out naturally.

The Dryer won’t Spin

Check the kid lock feature of the Samsung Dryer if it is not functioning correctly. The drum system plays a significant role in the working cycle of the Dryer. If there is a defect in any component of the drum system, the Dryer will not spin.

Samsung Dryer Spining Troubleshooting

  • If the Samsung Dryer has a light on but is not functioning correctly, the kid lock is engaged. The Samsung Dryer will operate once the kid lock feature is off.
  • If the drive belt on a Samsung Dryer breaks, the appliance might not function properly. Remove the fractured belt and replace it with a fresh strap before replacing it on the drum.
  • Sometimes, the drive motor of the Dryer fails. If the problem with the drive motor is not fixable, you should replace it.

Samsung Dryers Make a Noise

When the dryer has a problem, it makes a peculiar grinding sound and vibrates. Never disregard the strange noises; instead, investigate the issue. Turn off the power to the Dryer and look for problems.

Samsung Dryer Noise Troubleshooting

  • If the drum rollers of the Dryer become damaged, the appliance will create noises that are not normal, such as squeaking. Take off the drum so that you can look at the rollers. Repair the flaw or, if necessary, replace all of the rollers.
  • The Dryer will make strange noises if the drum has too much laundry. Put enough garments in the drum to fill 80% of it. 20% of the drum must be empty.
  • If the idler pulley on the Dryer is defective, the appliance will make strange noises. First, remove the drum so that you can examine the idler pulley. If necessary, you should get a new one to replace it.

The Dryer finishes the cycle early or takes too long to dry clothing.

The first thing you should check is the drying settings on your Dryer if you notice that each cycle of drying the clothing takes an unusually long time or if the clothes are still somewhat damp after the complete process.

Samsung Dryer cycle Troubleshooting

  • The issue arises due to incorrect cycle settings or a high dryness level. Check the settings and increase the Dryer’s dryness level.
  • If the Dryer’s moisture sensor has residue, it will not work accurately. Clean and dry the moisture sensors before restarting their cycle.
  • If the blower wheel of the Dryer is clogged or damaged, it interrupts its performance. Perform a manual inspection of the blower wheel. Replace it if it moves around in its position.

People Also Read:


This post will make it much simpler for you to diagnose and fix common Samsung Dryer Problems. When working on the Dryer’s internal components, you should never forget to disconnect it first and refer to the user manual for advice and preventative maintenance suggestions. Check the Dryer’s settings, diagnose all its common issues, repair the defective parts, or replace them with new ones if needed. Call a professional repair agency if you cannot resolve the issue or need assistance locating and fixing the problems with your Dryer

FAQ Section

Why isn’t my Samsung Dryer drying the clothes?

If your Dryer is heating up properly, but your clothes aren’t drying, your vent is probably blocked. Additionally, your moisture sensors can be contaminated if your Dryer stops working after only a few minutes with soaked clothes.

What causes a Dryer to malfunction?

There are numerous typical reasons why your Dryer may stop before it has completed its cycle. A clogged exhaust vent causing overheating, a failed timer or push-to-start button, or a damaged motor are common problems.

Why is the light on my Samsung Dryer blinking?

A clogged lint screen or vent system trapping heat in the Dryer is the usual cause. Clean the lint screen, vent system, or both to correct the error.

Where are the Dryer moisture sensors?

Inside the Dryer drum, look for two metal strips about four inches long and side by side. It might be right behind the plastic box that houses your lint filter. It could also be on the Dryer drum’s back wall.

What should you do if your Dryer won’t start?

Check that the child lock is active.
Plug the Dryer into the main switch; don’t use an extension.
Close the door completely before starting the Dryer.

What is the most common issue with the Samsung Dryer?

One of the most common issues is a Samsung Dryer not heating. If the Dryer’s heating element breaks, the Dryer won’t heat up.

What is the most common problem with Samsung dryers?

Following are most common Problem in Samsung Dryers
The Dryer won’t Turn ON
The Dryer won’t Spin
Samsung Dryers Make a Noise
Samsung Dryer not Heating

About the author

Author description olor sit amet, consectetur adipiscing elit. Sed pulvinar ligula augue, quis bibendum tellus scelerisque venenatis. Pellentesque porta nisi mi. In hac habitasse platea dictumst. Etiam risus elit, molestie 

Leave a Comment